The STM32F103C8T6 Development Board is a breakout board for the ST-Micro STM32F103C8T6 microcontroller. It includes all the essential components and peripherals required for basic operation of this 32-bit ARM-core device. To help keep the overall cost down, the header pins are supplied separately – so a bit of light soldering will be needed before you can start using the board. You will also need an external programmer to upload firmware to these boards, but no need to worry – we stock those as well. You’ll find a link to the ST-Link V2 Programmer at the bottom of this page.
Features / Specs
- Brand / Manufacturer: Generic
- Microcontroller: ST-Micro STM32F103C8T6
- CPU: ARM Cortex M3 32-Bit RISC CPU
- Max CPU Frequency: 72MHz
- Flash Memory: 64kB
- SRAM: 20kB
- Timers: 3x 16-Bit General Purpose Timers / 1x 16-Bit PWM Timer / 2x Watchdog Timers / 1x SysTick Timer (24-Bit Downcounter)
- Communication Interfaces: Up to 2x SPI (18Mbit/s) / Up to 2x I2C (SMBus; PMBus) / Up to 3x USART / 1x USB 2.0 Full Speed Interface / 1x CAN Interface (2.0B Active)
- Other Features: 2x 12-Bit ADC’s / 1x 7-Channel DMA
- On-Board Crystals: 8MHz (Main Oscillator) / 32.768kHz (RTC)
- Supply Voltage: 5VDC / 3.3VDC
- Operating Voltage: 3.3VDC (LDO has max current rating of 300mA)
- USB Connector Type: Micro USB
- Programming Interface: 4-Pin SWD
- Indication LEDs: 1x Power LED / 1x User Controlled LED (PC13)
- Header Pin Pitch: 2.54mm
- Spacing Between Header Pin Rows: 15.24mm (Breadboard Compatible)
- Dimensions: ~(56.5mm x 22.6mm x 12mm)
