The STM32F103C8T6 Development Board is basically a breakout board for the ST-Micro STM32F103C8T6 microcontroller. It contains all the components and peripherals necessary for basic operation of this 32-bit ARM core device. The header pins are supplied separately to lower the overall cost of the board, but this does mean you will need to do a bit of light soldering before getting stuck in. Another thing worth mentioning is that you will need an external programmer to program these boards, but not to worry, we stock those as well. You can find a link for the ST-Link V2 Programmer at the bottom of this page.
Features / Specs
- Microcontroller: ST-Micro STM32F103C8T6
- CPU: ARM Cortex M3 32-Bit RISC CPU
- Max CPU Frequency: 72MHz
- Flash Memory: 64kB
- SRAM: 20kB
- Timers: 3x 16-Bit General Purpose Timers / 1x 16-Bit PWM Timer / 2x Watchdog Timers / 1x SysTick Timer (24-Bit Downcounter)
- Communication Interfaces: Up to 2x SPI (18Mbit/s) / Up to 2x I2C (SMBus; PMBus) / Up to 3x USART / 1x USB 2.0 Full Speed Interface / 1x CAN Interface (2.0B Active)
- Other Features: 2x 12-Bit ADC’s / 1x 7-Channel DMA
- On-Board Crystals: 8MHz (Main Oscillator) / 32.768kHz (RTC)
- Supply Voltage: 5VDC / 3.3VDC
- Operating Voltage: 3.3VDC (LDO has max current rating of 300mA)
- USB Connector Type: Micro USB
- Programming Interface: 4-Pin SWD
- Indication LEDs: 1x Power LED / 1x User Controlled LED (PC13)
- Header Pin Pitch: 2.54mm
- Spacing Between Header Pin Rows: 15.24mm (Breadboard Compatible)
- Dimensions: ~(56.5mm x 22.6mm x 12mm)
