Orange Pi CM4 – 8GB RAM 64GB EMMC

R1,270.00

Package Includes

  • 1x Orange Pi CM4 Main-Board With 8GB RAM & 64GB EMMC
  • PLEASE NOTE: Base Board And Power supply sold separately

Availability: 1 in stock

The Orange Pi CM4 is an open-source SBC (Single Board Computer) which is Orange Pi’s answer to the Raspberry Pi Compute Module 4. Following the same form factor and modular design, the Orange Pi CM4 features a high performance CPU, GPU, LPDDR4 SDRAM, on-board eMMC, video output support, camera interface support, gigabit Ethernet support, WiFi 5, BT5.0, and the list goes on. The Orange Pi CM4 is a more compact version of the Orange Pi 3B, measuring only 55x40mm. At the heart of the device sits a Rockchip RK3566 64-bit 1.8GHz quad core Cortex A55 processor, alongside a Mali G52 2EE graphics processor, with 8GB of LPDDR4 SDRAM and 64GB on-board eMMC to top it all off. Compatible operating systems include Orange Pi OS, Android 11, Debian 12, Ubuntu 22.04 and OpenHarmony to mention a few.

Please Note:
The Orange Pi CM4 cannot be used standalone and requires a base board to function correctly. You can find a link to the Orange Pi Base Board at the bottom of this page.

Features / Specs

  • Brand: Orange Pi
  • Model: CM4 (Compute Module 4)
  • CPU: Rockchip RK3566 64-bit 1.8GHz Quad Core Cortex A55
  • GPU: Mali G52 2EE (Supports OpenGL ES 1.1/2.0/3.2 / OpenCL 2.0 / Vulkan 1.1 / Embedded high performance 2D acceleration hardware)
  • NPU (Neural Processing Unit): Integrated RKNN NPU AI accelerator with 0.8 TOPS @ INT8 computing power (Supports one-click conversion of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet architecture models)
  • VPU: 4k @ 60fps H.265/H.264/VP9 video decoding / 1080p @ 100fps H.265 video encoding / 1080p @ 60fps H.264 video encoding
  • Power Management Chip: RockChip RK809-5
  • Memory: 8GB LPDDR4 SDRAM (Shared by CPU and GPU)
  • On-Board Storage: 64GB eMMC Chip / SPI Flash Chip Footprint (No Flash memory supplied)
  • Other Storage: Micro SD (TF) Card Slot / M.2 (PCIe 2.0 / SATA3) M-KEY Socket for NVME SSDs (All accessible via 100-Pin connector)
  • On-Board Wired Network: 10/100/1000Mbps Ethernet (On-board PHY Chip: YT8531C) (Ethernet MDI signals accessible via 100-Pin connector)
  • On-Board Wireless Network: AMPAK Technology AP6256 / WiFi 5 (IEEE 802.11 a/b/g/n/ac) / Bluetooth 5.0 & BLE
  • Video Input(s): 1x MIPI CSI 4-Lane Camera Interface (Accessible via 100-Pin connector)
  • Audio Input(s): 3.5mm Audio Jack (Accessible via 100-Pin connector)
  • Video Output(s): 1x HDMI 2.0 (Up to 4K @ 60fps) / 1x MIPI DSI 2-Lane Display Interface / 1x MIPI DSI 4-Lane Display Interface (All accessible via 100-Pin connector)
  • Audio Output(s): 3.5mm Audio Jack (Accessible via 100-Pin connector)
  • Input Power Source: USB Type-C Interface (Power supply should be rated at 5V 3A) (Accessible via 100-Pin connector)
  • USB Ports: 1x USB 3.0 Type-A Socket (HOST) / 2x USB 2.0 Type-A Sockets (HOST) / 1x USB 2.0 Type-A Socket (Device or HOST) (All accessible via 100-Pin connector)
  • Low-Level Peripherals: 40-Pin header with I2C, SPI, UART, PWM, and multiple GPIO ports / MaskROM, RESET, and Recovery Buttons (All accessible via 100-Pin connector)
  • Debugging Interface: 3-Pin Header – UART Serial Port (RX, TX and GND pins) (Accessible via 100-Pin connector)
  • Indication LEDs: Power LED / Status LED (All accessible via 100-Pin connector)
  • Other Interfaces: 4-Pin 2.54mm Pitch Fan Header (Accessible via 100-Pin connector)
  • Supported Operating Systems: Android 11 / Ubuntu 22.04 / Ubuntu 20.04 / Debian 11 / Debian 12 / Orange Pi OS (Arch) / Orange Pi OS (OH) based on OpenHarmony / OpenHarmony 4.0 Beta 1
  • Dimensions: ~(55mm x 40mm)

Resources

THESE MAY ALSO INTEREST YOU

Scroll to Top