The Orange Pi 5 Plus is an open-source SBC (Single Board Computer) which features a high performance CPU, GPU, LPDDR4 SDRAM, video outputs, camera interface, LCD interface, dual high-speed Ethernet ports, M.2 PCIe M-KEY slot, M.2 PCIe E-KEY Slot, and the list goes on. The Orange Pi 5 Plus has a slightly larger form factor than the Orange Pi 5, but is still very compact with the main-board measuring 100x75mm. At the heart of the device sits a Rockchip RK3588 64-bit 8-core processor (4x Cortex A76 @ 2.4GHz, 4x Cortex A55 @ 1.8GHz, and separate NEON co-processors), alongside a Mali-G610 graphics processor, with 16GB of LPDDR4 SDRAM to top it all off. Compatible operating systems include Orange Pi OS, Android 12, Debian 11, and Ubuntu 22.04.
Features / Specs
- Brand: Orange Pi
- Model: 5 Plus
- CPU: Rockchip RK3588 64-bit 8-core Processor (4x Cortex A76 @ 2.4GHz, 4x Cortex A55 @ 1.8GHz, and separate NEON co-processors)
- GPU: Mali-G610 MP4 “Odin” (Supports OpenGL ES 1.1/2.0/3.2 / OpenCL 2.2 / Vulkan 1.2 / With 2D and 3D graphics engine)
- NPU (Neural Processing Unit): Built-in AI accelerated NPU with up to 6 TOPS computing power (Supports INT4 / INT8 / INT16 / FP16 mixed operation)
- Power Management Chip: RK806-1
- Memory: 16GB LPDDR4/4x SDRAM (Shared by CPU and GPU)
- On-Board Storage: QSPI Nor FLASH 16MB/32MB / Micro SD (TF) Card Slot (Up to 128GB) / eMMC Socket (Supports 16GB/32GB/64GB/128GB/256GB eMMC Module) / M.2 PCIe M-KEY Socket (Supports 2280 NVMe SSD, PCIe 3.0 x 4, Up to 2000MB/s)
- On-Board Wired Network: 2x PCIe 2.5G high-speed Ethernet Ports (RTL8125BG Chip)
- Wireless Network: Can be added via M.2 PCIe 2.0 E-KEY Slot
- Audio Codec: ES8388
- Audio Input(s): 3.5mm Audio Jack with Mic Input / On-board MIC / HDMI 2.1 eARC
- Video Input(s): 1x MIPI CSI 4-Lane
- Audio Output(s): HDMI (Up to 4K @ 60FPS) / 3.5mm Audio Jack
- Video Output(s): 2x HDMI 2.1 (Up to 8K @ 60FPS) / Type-C with DP TX 1.4A (Up to 8K @ 30FPS) / MIPI DSI TX 4-Lane (Up to 4K @ 60Hz)
- Touch Interface(s): 1x 6-Pin FPC Socket
- Input Power Source: USB Type-C Interface (Power supply should be rated at 5V 4A)
- USB Ports: 2x USB 3.0 Type-A Sockets / 1x USB 2.0 Type-A Socket / 1x USB 3.0 Type-C Socket
- Low-Level Peripherals: 40-Pin dual-row header with I2C, SPI, UART, CAN, I2S, PDM, PWM, AUDDSM, SDIO, and multiple GPIO ports / MaskROM, Recovery, and On-Off Buttons
- Debugging Interface: 3-Pin Header – UART Serial Port (RX, TX and GND pins)
- Indication LEDs: RGB LED
- Additional Hardware & Interfaces: 5VDC Fan Connector / RTC Connector (2-Pin 1.25mm) / Speaker Connector / IR Receiver
- Supported Operating Systems: Orange Pi OS (Droid) / Orange Pi OS (Arch) / Android 12 / Ubuntu 22.04 / Debian 11
- Dimensions: ~(100mm x 75mm)
Notes
- Recommended Power Supply: Orange Pi 5V 4A Power Supply – USB Type-C
- Compatible Micro SD Cards (Tested): SanDisk Ultra MicroSD 32GB
