The Orange Pi 3B is an open-source SBC (Single Board Computer) which features a high performance CPU, GPU, LPDDR4 SDRAM, video outputs, 1 camera interface, gigabit Ethernet port, WiFi 5, BT5.0, M.2 PCIe M-KEY slot, and the list goes on. The Orange Pi 3B has the same form factor as the Orange Pi 3 LTS, measuring 85x56mm. At the heart of the device sits a Rockchip RK3566 64-bit 1.8GHz quad core Cortex A55 processor, alongside a Mali G52 2EE graphics processor, with 4GB of LPDDR4 SDRAM to top it all off. Compatible operating systems include Orange Pi OS, Android 11, Debian 12, Ubuntu 22.04 and OpenHarmony to mention a few.
Features / Specs
- Brand: Orange Pi
- Model: 3B
- CPU: Rockchip RK3566 64-bit 1.8GHz Quad Core Cortex A55
- GPU: Mali G52 2EE (Supports OpenGL ES 1.1/2.0/3.2 / OpenCL 2.0 / Vulkan 1.1 / Embedded high performance 2D acceleration hardware)
- NPU (Neural Processing Unit): Integrated RKNN NPU AI accelerator with 0.8 TOPS @ INT8 computing power (Supports one-click conversion of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet architecture models)
- Power Management Chip: RockChip RK809-5
- Memory: 4GB LPDDR4 SDRAM (Shared by CPU and GPU)
- On-Board Storage: eMMC Module Interface (Supports 16/32/64/128/256GB eMMC Modules) / Micro SD (TF) Card Slot / M.2 (PCIe 2.0 / SATA3) M-KEY Socket for NVME SSDs / 16MB SPI Flash
- On-Board Wired Network: 10/100/1000Mbps Ethernet (On-board PHY Chip: YT8531C)
- On-Board Wireless Network: CdTech CDW-20U5622 / Dual-band WiFi (IEEE 802.11 a/b/g/n/ac) / Bluetooth 5.0 & BLE
- Video Input(s): MIPI CSI 2-Lane Camera Interface
- Audio Input(s): 3.5mm Audio Jack
- Video Output(s): HDMI 2.0 (Up to 4K @ 60fps) / 1x MIPI DSI 2-Lane / 1x eDP 1.3
- Audio Output(s): HDMI / 3.5mm Audio Jack
- Input Power Source: USB Type-C Interface (Power supply should be rated at 5V 3A)
- USB Ports: 1x USB 3.0 Type-A Socket (HOST) / 2x USB 2.0 Type-A Sockets (HOST) / 1x USB 2.0 Type-A Socket (Device or HOST)
- Low-Level Peripherals: 40-Pin header with I2C, SPI, UART, PWM, and multiple GPIO ports / MaskROM, RESET, and On-Off Buttons
- Debugging Interface: 3-Pin Header – UART Serial Port (RX, TX and GND pins)
- Indication LEDs: Power LED / Status LED
- Other Interfaces: 2-Pin 1.25mm Pitch 5VDC Fan Socket / 2-Pin 1.25mm Pitch RTC Socket
- Supported Operating Systems: Android 11 / Ubuntu 22.04 / Ubuntu 20.04 / Debian 11 / Debian 12 / Orange Pi OS (Arch) / Orange Pi OS (OH) based on OpenHarmony / OpenHarmony 4.0 Beta 1
- Dimensions: ~(85mm x 56mm)
Notes
- Recommended Power Supply: Orange Pi 5V 3A Power Supply – USB Type-C
- Compatible Micro SD Cards (Tested): SanDisk Ultra MicroSD 32GB