The LD2410B from Hi-Link is a high sensitivity 24GHz human presence sensing module. It operates primarily based upon the principle of FMCW (Frequency Modulated Continuous Wave) to detect human targets in a set space. Radar signal processing and accurate human body sensing algorithms allow a high level of sensitivity when detecting bodies that are either in motion or stationary – a big step up from your standard PIR sensors. Approximate distance to the target can also be calculated using the data received from the radar sensor. Reaching up to a maximum sensing distance of 6 meters (With a resolution of 0.75m), this sensor is primarily used indoors to output results in real-time.
Features / Specs
- Manufacturer: Hi-Link
- Model: LD2410B
- mmWave Sensor Chip: Iclegend S3KM1110
- Frequency Band: 24 – 24.25GHz (Complies with FCC and CE Certification Standards)
- Modulation: FMCW (Frequency Modulated Continuous Wave)
- Sensing Distance: 0.75 – 6 Meters
- Resolution: 0.75 Meters
- Sensing Angle: ± 60 Degrees
- Operating Voltage Range: 5 – 12VDC
- Output and Logic Level Voltage: 3.3VDC
- Operating Current: ~79mA
- Operating Temperature Range: -40°C to +85°C
- Communication Protocol: UART (Default Baud Rate = 256000 / 1 Stop bit / No Parity bit)
- Header Pin Pitch: 1.27mm
- Dimensions: ~(35mm x 7mm)
Pin Description
- 1. OUT-> Digital Output (HIGH if human body is detected, otherwise LOW)
- 2. UART_TX-> UART TX Pin
- 3. UART_RX-> UART RX Pin
- 4. GND-> Ground
- 5. VCC-> Supply Voltage (5 – 12VDC)
