YEAR END CLOSING TIMES - We will be closed from Thursday the 5th of December through to Wednesday the 18th of December.

We will be re-opening again on the 19th of December, and we will be open on all normal working days thereafter through to 2025.

Any orders placed before 1PM on Wednesday the 4th of December will be processed and collected that same afternoon.

Any orders placed between the 5th and 18th of December will only be processed on the 19th of December. All stock for orders placed and paid for during this period will be reserved for that specific order.

Heltec WiFi LoRa 32 V3 - 868MHz • Make Electronics

Heltec WiFi LoRa 32 V3 – 868MHz

R570.00

Package Includes

  • 1x 868MHz Heltec WiFi LoRa 32 V3
  • 2x 18-Way SIL Straight Pin Headers
  • 1x 2-Pin 1.25mm SH Battery Connector with 15cm cable
  • 1x 10cm Female IPEX to Female SMA Cable
  • 1x 868MHz SMA Antenna

Availability: 4 in stock

General Features / Specs

  • Manufacturer: Heltec Automation
  • PCB Model: WiFi_LoRa_32_V3 (868MHz)
  • Core IC: Espressif ESP32-S3FN8 (Xtensa® 32-bit LX7 Dual-Core Processor, Up to 240MHz)
  • Flash Memory: 8MB Quad SPI In-Package Flash
  • ROM: 384kB
  • SRAM: 512kB
  • RTC SRAM: 16kB
  • USB to UART Interface IC: Silicon Labs CP2102
  • LoRa Chip: Semtech SX1262
  • LoRa Antenna Connector: Male IPEX Socket (1st Gen)
  • LoRa Frequency: 868MHz
  • Display: 0.96 Inch 128*64 OLED Display (Blue)
  • Battery Connector: 2-Pin SH Series Socket (1.25mm Pitch)
  • Battery Interface Features: Integrated Lithium battery management system (Charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching)
  • Lithium Battery Supply Requirements: 3.3 – 4.2VDC (≥ 250mA)
  • USB Connector Type: USB Type-C
  • USB Interface Features: ESD protection / Short Circuit Protection / RF Shielding
  • USB Supply Requirements: 4.7 – 6.0VDC (≥ 500mA)
  • 3.3V Pin Supply Requirements: 2.7 – 3.5VDC (≥ 150mA)
  • 3.3V Pin Max Output Current: 500mA
  • Typical Current Consumption (USB Powered): WiFi Scan – 115mA / WiFi AP – 150mA / BT – 115mA / LoRa TX @ 14dB 868MHz – 200mA / LoRa TX @ 22dBm 868MHz – 230mA / LoRa RX @ 868MHz – 90mA (Tx Disabled)
  • Certifications: CE
  • Operating Temperature: -20 to +70°C
  • Dimensions: ~(50.2mm x 25.5mm x 10.2mm)

WiFi Features / Specs

  • WiFi Protocols: 802.11 b/g/n (1T1R mode with data rate up to 150 Mbps)
  • Frequency Band: 2.4GHz (Supports 20MHz and 40Mhz Bandwidth)
  • Wireless Network Modes: Station / SoftAP / SoftAP + Station
  • Hardware Features: 45x Programmable GPIO’s / 4x SPI / 1x LCD Interface / 1x DVP Camera Interface / 3x UART / 2x I2C / 2x I2S / 1x RMT (TX; RX) / etc
  • WiFi Security: Secure Boot / Flash Encryption / 4k-bit OTP, up to 1792 bits for users / Cryptographic Hardware Acceleration

Bluetooth Features / Specs

  • Bluetooth Protocols: Bluetooth LE – Bluetooth 5, Bluetooth Mesh
  • Power: Up to 20dBm
  • Speeds: 125kbps / 500kbps / 1MBps / 2MBps
  • Other Features: Internal co-existence mechanism allowing WiFi and Bluetooth to share a single antenna

LoRa SX1262 Features / Specs

  • Working Frequency: 868Mhz
  • Receive Sensitivity: As low as -148dBm
  • RX Current: 4.6mA
  • Transmit Power: Up to +22dBm
  • Programmable Bit Rate: Up to 62.5kbps LoRa and 300kbps FSK
  • Modulation Types: FSK / GFSK / MSK / GMSK / LoRa / Long Range FHSS

Resources

Scroll to Top